Ryobi ONE+ 3-Speed Impact Wrench Kit (1x 5.0Ah) 18V R18IW3-150

Power through tough fastening jobs! The 18V ONE+ Cordless Impact Wrench will remove or tighten heavy-duty bolts within seconds saving you time and a lot of effort.

Throw away your manual wrench or ratchet, why spend time and effort arduously hand tightening or removing bolts and other fasteners, when you can do it in a fraction of the time and minimal effort with the 18V ONE+™ Cordless Impact Wrench.Built for power and precision, it delivers up to 400Nm of torque to help change car tyres or fix large fasteners for your latest DIY project within seconds.

Using the included 5ah battery, the Ryobi R18IW3 can remove 125 wheel nuts on a single charge.

This kit contains the R18IW3 ONE+ 3-Speed Impact Wrench, a 5.0Ah battery and a fast charger.

• 400Nm of max torque ideal for fast tightening and removing of heavy-duty fasteners so there's no strain and reduced task time
• Impact action (the hammer striking the anvil) which is connected to the socket to deliver a powerful burst of torque
• 3-speed control provide greater versatility and allowing you to choose the suitable speed for your task and prevent over or under tightening
• Tri Beam LED lights eliminate allows you to work in dimly lit areas or at night
• 1/2" square drive with locking pin for easy socket fitment, giving you more time to get on with the job
• As part of the ONE+™ system for the home and garden, this tool can be powered by any 18V ONE+™ battery!

All Ryobi ONE+ Tools require an 18V ONE+ battery to operate. The larger the capacity (Ah), the longer a tool will run for on a single battery charge. Each battery listed below is fully compatible with all Ryobi ONE+ Power and Garden Tools.

• 2.0Ah Battery: 50 wheel nuts
• 2.5Ah Battery: 62 wheel nuts
• 4.0Ah Battery: 100 wheel nuts
• 5.0Ah Battery: 125 wheel nuts

Performance

• Impact rate: 0-3200 ipm
• Max. fastening torque: 400 Nm
• No load speed: 0-2900
• No load speed gear 1: 0-2100 rpm
• No load speed gear 2: 0-2500 rpm
• No load speed gear 3: 0-2900 rpm
• Torque settings: 180/230/400

Power Source
• Battery pack capacity: 5Ah
• Battery type: Li-ion
• Charger included: RC18150
• No. of batteries supplied: 1
• Power: 18 V

Weight
• Weight without battery: 1.6 kg
• Weight with battery pack: 2.4 kg (4.0Ah)

Batteries & Charger

• (1) 5.0Ah Battery
• (1) Fast Charger

Tool Accessories

• (1) 1.4" hex adaptor